Accumulator Blow Moulding Machine KLB120

high quality

RFQ

Description

Download

Specification		KLB120
Material	PE.PP.ABS…
Max container capacity	L	200	250
Output(dry Cycle)	pc/nr	120	120
Dimension(L×W×H)	M	7.5×4.6×6.5	7.5×4.6×6.5
Total weight	ton	30	35
Clamping Unit
Clamping force	KN	1000	1500
Platen opening stroke	mm	650-1850	650-2400
Platen size	mm	1300×1400	1400×1750
Max mould size(W×H)	mm	1300×1600	1400×2400
Mould thickness	mm	660-850	660-900
System Pressure	Mpa	12/20	12/20
Power
Total power	Kw	188 / 208 / 230
Fan power for screw	Kw	4	4
Oil pump power	Kw	45	55
Air pressure	Mpa	1.2	1.2
Air consumption	m3/min	1-3	1-3
Average energy consumption	KW/h	140	160
Servo motor power	Kw	7.5	7.5
Extruder unit
Screw diameter	mm	120	120
Screw L/D ratio	L/D	30	30
Plasticising capacity	Kg/hr	280 / 330 / 400	280 / 330 / 400
Number of heating zone	zone	6	6
Extruder heating power	KW	47	54
Extruder driving power	KW	90 / 110 / 132	90 / 110 / 132
Die-head
Power of die heating	KW	40	45
max diameter of head tooling	mm	300-650	300-800
Accumulator capacity	L	20	25-30

*Figures and data in this catalogue are subject to change without notice due to constant research and development.

KLB120 extrusion blow molding machine, which is produced by our company, is mainly applicable to the production of blowing barrels, motorcar gasoline tank, toolbox and other large plastic hollow products.

It consists of main machine, electric, hydraulic, pipe and other selection functional parts.

The main machine in including: extrusion device; accumulator head; clamping unit; frame; functional blowing device (optional); and manipulator (optional), etc.

Electric system in including: the heating and temperature controlling system of die-head and extruder; parison controlling system (optional); PLC and related

safe-guarding system.

Hydraulic system: hydraulic supply and its pressure, direction, flow controlling parts.

Pipeline parts: distribution of machine pipe, including oil, water and air pipe.

The shaping principle is “extruding- blowing”.The extruder adopts inverter to adjust、the speed to get the great timing range, which could meet the producing requirements for different products. The fused plastic plasticized by the extruder, is extrude into the accumulator head. When it reaches a certain volume, parison controller (optional) will constantly change the opening range of the die. And then it is injected into mould and blown out the products. Finally the manipulator (optional) will take the product out. Thus a complete circle finished.

This machine optional function parts are including: bottom blowing device, manipulator, and parison controller, which are subject to the configurations of the purchase order.

Share your thoughts 6 0

Your rating